Menu
Cart 0

Aurora Engine Control Panels

  • SKU # CP005
  • $499.00


Advanced Engine Control Panel

Upgrade, Replace, or Refurbish | Designed for mechanically and electronically governed engines.

Industrial, Mining, Construction, Pumping, Irrigation, Power Generation, Marine Engine Control, Mobile Equipment, Mining, Irrigation and more.

Model: CP005
Dimensions: 10.59 x 8.59 x 5.11 in.
268.99 x 218.19 x 129.79 mm
Weight: 7.1 lbs

 

ENGINE & GENERATOR CONTROL

Industrial Engine Control Panel | Generator Control Panel

 

WHY CHOOSE AN AURORA CONTROL PANEL?

As a manufacturer of diesel generators, we understand how time-consuming and costly failures can be. Downtime can cost hundreds of dollars. Failure is not an option. To reduce the likelihood of it happening, we designed and built our engine panels using years of experience around industrial equipment. In a way, we are our own customer. We demand better quality for our industrial engines and generators, and we are sure you would look for the same in yours.

Aurora Control Panels make it easy to upgrade or install in new or used equipment. It saves you time and money.

We use Tough Series DynaGen engine and generator controllers that offer complete monitoring and control. Setup is easy, field programmable without any special tools or software. There is very little our control panels can't do. So, if you are not sure if it is the right fit for you, contact us!

 

ENCLOSURE FEATURES

RUGGED & BUILT TO LAST

Aurora enclosures are UL508A listed (Standard for Industrial Control Panels), waterproof, and UL94V-0 flame rated. The tough Polycarbonate design is weather resistant and designed for outside or indoor use.

ENCLOSURE SPECIFICATIONS

  • Designed to IP66/IP68* of IEC 529 and NEMA 1, 2, 3, 3R, 4, 4X, 5, 6/6P*, 12 and 13 specifications.
  • It can wall or frame mounted using vibration isolation if required.
  • Weather and chemical resistant.
  • Able to withstand vibrations

 

TOUGH SERIES CONTROLLERS

BUILT TO SURVIVE - PERFORMS TO EXTREMES.

DynaGen Controllers are built tough and tested to higher SAE standards than others.    Tough Series controllers use superior automotive-grade plastics,  high heat laminates for the circuit boards, and resilient silicon front panel buttons.   They protect themselves from power dips, surges, vibration, and thermal shock.  They are built to perform consistently in the most extreme environments. 

 

TOUGH SERIES CONTROLLERS ARE BACKED BY A 5-YEAR WARRANTY, GIVING YOU PEACE OF MIND AND SAVING YOU TIME AND MONEY. IT IS THE LONGEST WARRANTY IN THE INDUSTRY!

 

PUMPS OR GENERATORS

Two controllers are available.  The TG or the TE410 Controller.  One for variable speed engines used in pumping applications and the other for fixed RPM engines used in Generators.  Each provide  complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines, as well as metering for generator applications.

 

DynaGen TE Water Pump Engine Controller

The controller can be easily configured using either the front panel buttons or FREE PC configurator software. The TG series controllers are ideally suited for severe duty applications where reliability is critical, such as mobile or stationary engine equipment and generators.

ADVANCED MONITORING & CONTROL

The 410 controller provides displays of Oil Pressure, Engine Temperature, Fuel Level, Oil Level, Engine Hours, RPM and Battery Voltage as well as J1939 Diagnostic Trouble Codes and a 150 Event Log. Two customer-defined sensor parameters for temperature, pressure, voltage or levels can also be configured. For generator applications, the TG410 provides a display of 3-Phase AC voltage, 3-Phase AC current, and frequency. A Modbus communications port is standard on the TG410 model, allowing connection of a remote annunciator or an Internet gateway for remote management. For applications requiring 

DynaGen Controller

  

For additional information please contact us at 1-877-510-6807

Custom solutions are available. 

 

 


We Also Recommend