GU601A Genset Controller

Automatic Generator Control Module

GU601A Generator Controller

The GU601A is a microprocessor controlled Automatic Generator Controller for Home Generators and Standby Generators. It can be used in either automatic or manual modes. Both modes are selectable from the front panel. In automatic mode it can be triggered by remote signals such as a loss of power or automatic transfer switch. The LCD display shows generator operational status and parameters. Its main characteristics as below

Protective parameters can easily be configured via panel input and menu system or by software, USB cable and PC
Controller can measure and display Alternator Frequency, Alternator Voltage, Battery Voltage, Oil Pressure and Coolant Temperature.
Built in hour meter.
Set fuel mode to normally closed or normally open mode.
5 relay control output Fuel and Start Crank relay outputs
3 of the 5 outputs are configurable
Oil Pressure and Engine Temperature Inputs
3 configurable inputs
All connections of controller are connected by pin locked up terminals, easier and more convenient to connect, move, maintain and replace the device.

Download GU601A Operation Manual